Transmission Fluids
Filtration Products
Air Intake Systems
Greases
2-Cycle Oils
Fuel Additives
Brake Fluids
Industrial Lubes
Family Fleet
4x4s
Racing
Trucking
R/Vs
Motorcycles
MotoX
Marine
Farm & Ranch
Fleet
Industrial
Heavy Equipment
Oil Selection & Filter Lookup Guide
 
 
"Official Oil" of

New AMSOIL "Fabulous Four" 2-Cycle Oils provide second-to-none protection and performance in modern two-cycle equipment

Two-cycle engines remain the workhorses in recreational equipment, including outboard motors, motorcycles, snowmobiles and personal watercraft, as well as in lawn and garden applications like lawn mowers and weed eaters. Design changes over recent years have included direct fuel injection engines, in which fuel is injected directly into the combustion chamber, and exhaust power valves, which improve combustion efficiency at varying RPM. These design changes have allowed two-cycle engine manufacturers to effectively reduce emissions, improve fuel efficiency and decrease oil consumption. Today's two-cycle motors of all types require specialized oil technology to deliver maximum engine protection, dependable operation and long service life

As the leader in two-cycle oil technology, AMSOIL has performed extensive research in developing a new line of revolutionary, specialized oils called the "Fabulous Four." AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil (AIT) was the first new oil to be introduced. It is primarily recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel injected (EFI) and direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles and ATV's. Formulated with wax-free premium quality synthetic esters and a specialized additive package, INTERCEPTOR is designed to address the exhaust valve sticking problems associated with certain snowmobile models.

New AMSOIL HP Injector Synthetic 2-Cycle Oil (HPI), DOMINATOR Synthetic 2-Cycle Racing Oil (TDR) and Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils complete the Fabulous Four lineup, replacing AMSOIL Synthetic 2-Cycle Injector Oil, Series 2000 Synthetic 2-Cycle Racing Oil and 100:1 Pre-Mix Synthetic 2-Cycle Oil, respectively. The application chart below ranks each oil's performance in common two-cycle applications.

TWO-CYCLE OIL RECOMMENDATION
AMSOIL Product
Outboard*
Snowmobile*,
Motorcycle* & ATV*
Personal Watercraft*
& Jet Boat*
Chainsaw,
Chop Saw & Pump
Weed Eater,
Blower & Lawn Mower
Moped, Scooter
& Go-Cart
HP Injector (HPI)
TC-W3, API TC
(Injection or 50:1 Pre-Mix)
Excellent
Very Good
Very Good
Not recommended
Not recommended
Not recommended
INTERCEPTOR (AIT)
API TC, JASO FC
Not recommended
Excellent
Excellent
Good
Good
Good
DOMINATOR (TDR)
API TC, JASO FC
Racing (1)
Racing (2)
Racing (2)
Very Good
Very Good
Very Good
Saber Professional 100:1 (ATP)
Pre-Mix ISO-L-EGD
JASO FC, API TC
Not recommended
Very Good
Pre-Mix Only
Very Good
Pre-Mix Only
Excellent
Excellent
Excellent
Saber Outboard 100:1 (ATO)
Pre-Mix, TC-W3, API TC
Excellent
Pre-Mix Only
Very Good
Pre-Mix Only
Very Good
Pre-Mix Only
Not recommended
Not recommended
Not recommended

Even though AMSOIL 2-Cycle Oils have been optimized for specific applications, they are multi-functional and recommended for use in many areas. The chart rates each oil's performance abilities per application as follows:

Excellent: "The" primary recommendation for the oil. This is the best possible choice for the application. The oil is specifically designed for the operating conditions of the motors in these markets. There is only one "Excellent" recommendation per category.

Very Good: A main recommendation for the oil. Identifies an oil that is very good for the operating conditions of these motors.

Good: A secondary recommendation for an oil. The oil was not specifically designed for these applications, however, the chemistry in the oil is suited to the operating conditions of these motors.

Not Recommended: Identifies applications where the product was not intended for use. "Excellent" rated products otter superior performance.

Racing:

(1) Not recommended for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short term use where motors are periodically inspected.

(2) Excellent for racing or modified motors. Very good for recreational use.

*Recommended for all (OFI) direct fuel injected, (EFI) electronic fuel injected, and carbureted motors. Outboard motors include Mercury®, Optimax®, Johnson® & Evinrude® FICHT® & E-TEC®, Yamaha® HPDI, Nissan® & Tohatsu® TLDI®

See the New Product Line Interview With Alan Amatuzio

Rinker Wins National Championship!

San Diego ~ Terry Rinker won his first National Championship for the AMSOIL/Rinker/Blackhawk team by a convincing margin. Rinker went into the San Diego "Thunderboat Regatta" with a dominant 192 point lead. Read the complete story

Dominator 2-Cycle Racing Oil

New AMSOIL DOMINATOR Synthetic 2-Cycle Racing Oil is a robust formulation specially engineered for unsurpassed protection in high performance two-cycle motors, both on and off the track. It contains heavier synthetic base oils that provide more lubricity for "on the edge" operation. DOMINATOR reduces friction and protects pistons and bearings subjected to the rigors of racing. DOMINATOR contains the right additives for clean motor operation.
Product Code: TDR

(click for product details)

Interceptor High Performance Synthetic 2-Cycle Oil

AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication.
Product Codes: AIT

(click for product details)

HP 2-Cycle Injector Oil

New AMSOIL HP Injector Synthetic 2-Cycle Oil is a precise synthetic formulation that exceeds the lubrication demands of modern two-cycle engines. It contains premium synthetic base oils and MAX-DOSE additive system, providing superior performance in direct fuel injected (DFI), electronic fuel injected (EFI) and carbureted outboard motors, as well as other recreational two-cycle equipment.
Product Codes: HPI

(click for product details)

Saber 2-Cycle Oil, 100:1 Pre-Mix

New AMSOIL Saber Professional Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios with this premium synthetic formulation.
Product Codes: ATP

(click for product details)

Saber Outboard 2-Cycle Oil, 100:1 Pre-Mix

New AMSOIL Saber Outboard Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Outboard contains lower temperature dispersants for water-cooled outboard motors. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios with this premium synthetic formulation.
Product Codes: ATO

(click for product details)

Synthetic Blend Bar and Chain Oil

Clings to metal surfaces better than other oils. Delivers unparalleled lubrication and protection.
Product Code: ABC

(click for product details)

 
 
© 2009 by AMSOIL Direct Jobber - The Oil Garage

No portion of this site may be used or duplicated without the express permission of AMSOIL Direct Jobber - The Oil Garage
Designed and administered by JB Design