Transmission Fluids
Filtration Products
Air Intake Systems
Greases
2-Cycle Oils
Fuel Additives
Brake Fluids
Industrial Lubes
Family Fleet
4x4s
Racing
Trucking
R/Vs
Motorcycles
MotoX
Marine
Farm & Ranch
Fleet
Industrial
Heavy Equipment
Oil Selection & Filter Lookup Guide
 
 

AMSOIL Saber Professional Synthetic, 100:1 Pre-Mix 2-Cycle Oil

 

AMSOIL Saber™ Professional (ATP) is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties to control friction and prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973. ISO-L-EGD, JASO FD, API TC

PRODUCT DESCRIPTION

Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5-oz. bilingual (English/Spanish) container which is ideal for treating the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professional is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives to prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is “smokeless” and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified.

Applications

AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

2.6 oz. per 1 U.S. gallon 50:1
8 oz. per 5 U.S. gallons 80:1
1.3 oz. per 1 U.S. gallon 100:1
8 oz. per 6 U.S. gallons 100:1


TYPICAL TECHNICAL PROPERTIES
Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oils

Kinematic Viscosity @ 100C, cSt (ASTM D-445)

13.5

Kinematic Viscosity @ 40C, cSt (ASTM D-445)

99
Viscosity Index (ASTM D-2270) 136

Pour Point C (F) (ASTM D 97)

-36 (-33)

Flash Point C (F) (ASTM D 92)

114 (237)
Fire Point C (F) (ASTM D 92) 114 (237)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.
 
 
© 2009 by AMSOIL Direct Jobber - The Oil Garage

No portion of this site may be used or duplicated without the express permission of AMSOIL Direct Jobber - The Oil Garage
Designed and administered by JB Design