EaAR Air Filters are specially designed for racing
and street rod enthusiasts who desire Ea protection in carbureted
applications. AMSOIL EaAR Air Filters are constructed with the
same dedication to quality as all other Ea filters.
AMSOIL custom EaAR filter assemblies are designed
with the racer in mind. They incorporate good looks and excellent
air flow, as well as the high efficiency customers expect from
Ea technology. These custom air cleaner assemblies are designed
for use with carbureted engines that use a 14-inch round element
air cleaner housing. The EaAR kits provide more air flow than
other assemblies of this type. Kits feature the common 14- inch
diameter carburetor plate, air filter and high air flow lid, and
they come with a 2-inch, 3-inch, 4-inch, 5-inch or 6-inch-high
filter to meet the needs of racers and enthusiasts. Replacement
filters, air flow lids and carburetor plates are also available
for purchase separately.
AMSOIL EaAR filter kits provide racers with more
power through the new Ea air flow lids. Not only does the Ea air
flow lid add filter area, it actually redirects airflow inside
the filter to pull in more air through the side pleats for even
greater performance efficiency. Cleanable and reusable, the AMSOIL
Ea air flow lid delivers the best protection available for engines,
and it comes in a wide range of applications. The air flow lids
feature a polished aluminum trim ring with AMSOIL logos etched
in the surface.
AMSOIL EaAR Air Filters are designed to replace
stock cellulose, oil-wetted gauze or foam filters. AMSOIL EaAR
Air Filters are composed of the same nanofiber media found in
the AMSOIL Ea Air Filters for auto and light truck applications
(EaA), Universal Cold Air Induction Filters (EaAU) and the AMSOIL
Ea Motorcycle Air Filters (EaAM). Nanofibers have sub-micron diameters
and small inter-fiber spaces, resulting in more contaminants being
captured on the surface of the media. Cellulose, wetted gauze
and foam filters are larger and have larger spaces between the
media, causing contaminants to load into the depth of the filter,
plugging the airflow path and resulting in higher restriction
and lower capacity. The nanofibers found in the AMSOIL EaAR Air
Filters are less than one micron in diameter and because of their
size, there are more pores per square inch (higher pore density),
allowing for higher dirt-holding capacity and lower pressure drop
when compared to traditional filter media. Thinner media fibers,
like those in the EaAR Air Filters, produce more uniform pore
size distribution, improving the filters overall availability
to capture and retain particles.
The nanofiber media is pleated with epoxy-coated
wire on the media for additional strength and stiffness. A high-quality
plastisol potting compound is used to ensure filter media and
screen stability while sealing the filter in the air box. The
EaAR filtration system allows air to flow through the side for
traditional filtering and offers additional filter area by allowing
air to flow through the nanofiber media on the top lid, adding
greater performance and superior efficiency.
AMSOIL EaAR Air Filters are cleanable and long
lasting. AMSOIL recommends cleaning EaAR Air Filters when designated
by the restriction gauge if the vehicle is so equipped, or according
to operating conditions. In dusty conditions or in high-performance
vehicles, more frequent cleaning may be required. EaAR Air Filters
may be cleaned by vacuuming the media on the dirty side or using
low pressure shop air to blow the filter media on the clean side.
AMSOIL recommends cleaning EaAR filters as conditions dictate.
Consult the below dimension sheet for applications.